Introducing the New 112 RGBWW LED 12mm Ribbon featuring an impressive 98CRI, exclusively available at Resolution Lighting. Ideal for film professionals, this premium LED ribbon ensures unparalleled color accuracy and vibrant illumination, perfect for any shooting scenario. With its seamless integration into various lighting setups, it empowers creatives to vividly bring their visions to life. Rely on our expertise in offering top-tier LED solutions for film and beyond, and elevate your projects to new heights. Illuminate your vision with Resolution Lighting's exceptional products and service.
RL112 RGBWW LED 12mm Ribbon 98CRI
LED Strip Type: 5-In-1 Higher Density RGBWW LED Strip LED Chip: Epistar Chip (SMD5050 5-IN-1 LED chip) Working Temperature: -4°F (-20°C) ~ 122°F (50°C) Storage Temperature: -40°F (-40°C) ~ 176°F (80°C) Light Color: RGB+CCT (2700K-6500K color temperature) Dimension: 16.4ft/roll, every 7PCS LED (62.5mm/2.46in) can be cut LED Quantity: 112 LEDs per meter (3.28ft), 560LEDs per roll Lifespan: 50,000+ hours Strip Width: 12mm (0.47in) Input Voltage(V): 24VDC Working Power: 26.88W/m, 134.4W /16.4ft Max Lamp Luminous Flux(lm): 7-8lm/led for white, 2-3lm/led for color, max 20lm/led PCB: 4 oz Beam Pattern: 120 degree Waterproof Rating: Non-waterproof IP20 CRI: 98 English Version
INSTALLATION
1. This product is intended for indoor, dry location use only.
2. This flexible LED ribbon is a UL Approved and is intended to be installed as part of a complete lighting system.
3. Use only with a Listed Class 2 power unit having an output not exceeding the rated input of the LED ribbon.
4. Disconnect power before installation or servicing.
5. Install the LED ribbon on a clean, dry, and smooth mounting surface. Must be installed onto a metal or aluminum type surface.
6. Observe correct polarity when making electrical connections.
7. Do not exceed the maximum current or length limits specified for the system. 10m is the maximum length.
8. The LED ribbon may be cut only at designated cut locations marked on the product, for shorter length.
9. Installation shall be performed by a qualified person in accordance with applicable electrical codes.
ADHESIVE MOUNTING – REQUIRED CAUTION
CAUTION: The mounting means provided with this luminaire has not been evaluated for reliability. If
installed where failure of the mounting means could cause injury to persons or damage to property
below, supplemental means of securement should be considered.
French Version.
1. Ce produit est destiné à une utilisation intérieure, dans un endroit sec uniquement.
2. Ce ruban LED flexible est approuvé UL et est destiné à être installé comme partie d’un système d’éclairage complet.
3. Utiliser uniquement avec une unité d’alimentation de Classe 2 homologuée, dont la sortie n’excède pas l’entrée nominale du ruban LED.
4. Débrancher l’alimentation avant l’installation ou l’entretien.
5. Installer le ruban LED sur une surface de montage propre, sèche et lisse. Doit être installé sur une surface de type métal ou aluminium.
6. Respecter la polarité correcte lors des connexions électriques.
7. Ne pas dépasser le courant maximal ni les limites de longueur spécifiées pour le système. 10 m est la longueur maximale.
8. Le ruban LED ne peut être coupé qu’aux emplacements de coupe désignés indiqués sur le produit, pour une longueur plus courte.
9. L’installation doit être effectuée par une personne qualifiée conformément aux codes électriques applicables.
MONTAGE ADHÉSIF – AVERTISSEMENT OBLIGATOIRE
AVERTISSEMENT : Le moyen de fixation fourni avec ce luminaire n’a pas été évalué quant à sa fiabilité. S’il est installé dans un endroit où la défaillance du moyen de fixation pourrait causer des blessures aux personnes ou des dommages aux biens situés en dessous, des moyens de fixation supplémentaires devraient être envisagés.
